tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com p191 series ? design for power factor correction with high fux density material ? 20% to 50% smaller than traditional designs ? switching frequency: 32khz min. ? ac line voltage: 265vac max. ? high frequency 200 khz C 700 khz ? operating temperature: -40c to +130c ? custom design available electrical parameters @ 25c part number p191- l (h 15%) r dc ( max) i dc (a) dim a max (mm) dim b max (mm) dim c nom (mm) dim d nom (mm) dim e nom (mm) 301-1 300 0.50 1.0 21.0 11.0 9.0 18.0 0.40 501-1 500 0.65 1.0 21.0 11.0 9.0 18.0 0.40 751-1 750 0.90 1.0 23.0 12.5 10.0 20.0 0.40 102-1 1000 1.20 1.0 25.0 11.0 9.0 22.5 0.40 152-1 1500 1.20 1.0 27.5 12.5 10.5 25.0 0.40 202-1 2000 2.00 1.0 29.0 13.5 11.0 26.0 0.40 301-2 300 0.32 2.0 26.0 12.0 10.0 23.0 0.60 501-2 500 0.40 2.0 29.0 14.0 11.0 26.0 0.60 751-2 750 0.60 2.0 31.0 17.0 13.0 28.0 0.60 102-2 1000 0.80 2.0 32.0 18.0 14.0 29.0 0.60 152-2 1500 0.85 2.0 34.0 19.0 15.5 30.0 0.60 202-2 2000 0.95 2.0 34.0 19.0 15.5 30.0 0.60 301-3 300 0.20 3.0 30.0 15.0 11.5 26.5 0.80 501-3 500 0.30 3.0 31.0 16.5 12.5 27.5 0.80 751-3 750 0.32 3.0 34.0 18.0 15.5 31.0 0.80 102-3 1000 0.40 3.0 36.0 20.0 16.0 32.0 0.80 152-3 1500 0.43 3.0 43.0 21.0 16.0 39.0 0.80 301-5 300 0.10 5.0 35.0 20.0 16.0 31.5 1.00 501-5 500 0.15 5.0 42.0 17.0 15.0 37.5 1.00 751-5 750 0.18 5.0 47.0 21.0 18.0 43.5 1.00 102-5 1000 0.20 5.0 49.0 23.0 19.0 45.0 1.00 152-5 1500 0.26 5.0 55.0 25.0 20.0 51.5 1.00 301-7 300 0.06 7.0 45.0 23.0 18.0 39.0 1.30 501-7 500 0.10 7.0 51.0 26.0 20.0 46.0 1.30 751-7 750 0.13 7.0 57.0 27.0 21.0 52.5 1.30 102-7 1000 0.18 7.0 57.0 27.0 21.0 52.5 1.30 product performance is limited to specifed parameters. data is subject to change without prior notice. passive power factor correction inductors
tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com product performance is limited to specifed parameters. data is subject to change without prior notice. unless otherwise specifed, all tolerances are: inch: .xx : 0.015 .xxx : 0.004 mm: x,x : 0,38 x,xx : 0,10 dimensions (mm) (h 15%) ( max) (a) (mm) (mm) (mm) (mm) (mm) 301-10 300 0.05 10.0 53.0 27.0 21.0 47.0 1.73 501-10 500 0.06 10.0 63.0 31.0 24.0 55.0 1.73 751-10 750 0.08 10.0 73.0 32.0 26.0 68.0 1.73 102-10 1000 0.09 10.0 77.0 36.0 28.0 70.0 1.73 notes: ? inductance test @ 10khz, 0.1v rms ? i dc : 10% roll off typ (20% max.) from initial inductance value ? add -v for vertical mount, -h for horizontal mount, -w for hook up wire ? extended length hook up wire with fast-on available on request passive power factor correction inductors
|